Return to the Clark Homepage


22AWG Two-Pair Audio Cable



Two Shielded Pairs - each pair is individually shielded for audio or data applications

Overall Round Construction - ideal for use with smaller diamerter and single connectors

22AWG Tinned Copper- corrosion resistant, low loss and improves solder adhesion

100% Foil Shields - fully shielded pairs for impoved RF/EMI noise rejection

Common Drain - simplifies shield and ground termination

UL Rated CM - suitable for installation in permanent install applications

Clark’s 22EPS2 is a two-pair shielded cable for balanced audio, data or control applications. Each conductor is made from 22AWG tinned copper for low DCR, corrosion resistance and improved solder adhesion. The conductors are insulated with a polypropylene dielectric that has lower capacitance and a higher melt temperature for reduced wick-back when soldering. UL rated CM, the 22EPS2 can be installed in a variety of permanent installation environments.


Materials & Dimentions


(4) 22AWG (7x30) Stranded TC, .030" O.D.

(cabled as two shielded pairs)


Polypropylene .010"wall

(red w/ black, white w/ green)


100% Foil (per pair) with

24AWG (7x32) Stranded TC Drain Wire

(drain wire is common for both shields)


Flexible PVC, .163" O.D.




Cross Sectional Diagram


Performance Characterisitics

DC Resistance Capacitance Temperature Range Weight UL Listing

Conductor: 14.4 Ω/Mft

Shield w/ Drain: 22.0 Ω/Mft

25.0 pF/ft between conductors -20degC to +75degC 18 lbs/Mft





2020 Clark Wire & Cable       1-800-CABLE-IT  (800-222-5348)