Return to the Clark Homepage

Schematic Drawings

3/8"  Female
1/2"  Female
3/8"  Male
1/2"  Male




Solid Outer Shield Ground

The solid outer braid ground in the ProAx connectors maintains the ground no matter what the conditions.
This eliminates camera shutdown from intermittent grounds, as well as the need for special conductive
gaskets between the male and female connectors.

Sturdy Construction
Each female ProAx connector is made of machined brass with stainless steel crush rings to assure maximum
crush strength. The assembly will not go out of round under typical mobile application wear and tear.

Patented Panel-Mount System
Each ProAx connector can be either cable-mounted or panel-mounted with our patented mounting kit.
The mounting kit securely fastens the male or female connector to a steel plate that is attached to
standard panels. Two different mounting options are available: a unique 45° and the standard 90°
straight. ADC’s angled 45° mounting option reduces the weight of the cables on the connectors and
providing less strain on the connectors than the traditional 90° mounting. Mounting yokes are available
separately for custom metalwork applications.

ProAx connectors are engineered to be compatible with other industry triaxial connectors from Kings
Electronics Co., Inc., W.W. Fischer SA, LEMO SA, Tajimi, and Damer and Hagen, as well as standard
industry tools and dies.


All products are RoHS Compliant

2020 Clark Wire & Cable       1-800-CABLE-IT  (800-222-5348)