Return to the Clark Homepage
 

AES/EBU Digital to Analog Converter

 


       

  • Broadcast Quality Audio D to A
  • Operation Up to 24 bits, 96 kHz
  • Automatic Sample Rate Detection
  • Exclusive Sure-Lok™ Auto-Recovery Sentinel
  • Adjustable Audio Output Gain Trim
  • Absent or Invalid Input Mutes Audio
  • AES/EBU Transformer Isolated Input
  • Input and Output Ground-Lift
  • Digital Signal ERROR Indication

APPLICATION: The RDL-RU-AEC1 is the ideal choice in installations requiring high quality analog audio from an AES/EBU digital audio source. The RDL-RU-AEC1 input XLR is 110 Ω terminated. Audio outputs are available both on XLR connectors and on the full-size barrier block.

Sure-Lok auto-recovery circuitry included in the RDL-RU-AEC1 monitors the most frequent causes of latch-up and reinitiates digital signal lock, bringing a new higher level of stability to digital audio signal conversion under the variety of conditions encountered in professional environments.


Part # Description Get Quote
RDL-RU-AEC1 D / A Converter AES / EBU

 

Specifications

 

Input:

110 Ω AES/EBU XLR, transformer isolated with terminal block ground-lift strap

Outputs (2):

150 Ω balanced XLR or terminal block with ground-lift straps

Sample Rate:

32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

Resolution:

16 to 24 bits

Frequency Response:

10 Hz to 20 kHz (+/- 0.5 dB)

THD+N:

< 0.04%

Crosstalk:

< -80 dB (100 Hz to 20 kHz);
-70 dB (10 Hz to 100 Hz)

Output Level:

Adjustable from +4 dBu to +21 dBu (input = 0 dBFS)

Phase L⇔R:

±1° to 10 kHz; ±1.5° to 20 kHz

Residual Noise:

< -90 dB (-240 dBFS, reference +4 dBu @ 0 dBFS)
< -95 dB (no digital input, reference +4 dBu @ 0 dBFS)

Dynamic Range:

> 90 dB

Indicators (2):

POWER LED and ERROR LED (ERROR indicates not locked to a valid signal)

Standards:

AES3-1992 Amendment 3-1999

Power Requirement:

GROUND-REFERENCED, 24 to 33 Vdc @ 150 mA


Data / Installation

 

 

 

 

  

 
 
2019 Clark Wire & Cable       1-800-CABLE-IT  (800-222-5348)