<% bEmpty = (request.querystring("bCart") = "empty") %> Infostream Multi-channel Raceway
Return to the Clark Homepage
 
 
 

  Cable Management                                 ...A Step Above The Rest
              
                                                INFOSTREAM® Multi-channel Raceway


InfoStream is a revolutionary design for a non-metallic raceway system.

The elliptical shape is aesthetically pleasing when compared to other designs.

By using the three rails to snap in dividers, the InfoStream system can accommodate up to four separate channels of electrical, voice, data, video or fiber optic cabling.

InfoStream’s unique and patented design make installations quicker and easier.

The raceway and fittings are manufactured from a UL 94V-0 rated material.


 

All fittings have been designed to maintain the required 1" minimum bend radius per

TIA/EIA-568-B and 569-A standards.

 

U.L. Listed to 600 Volts – Meets new UL5A and

   CSA 22.2 No. 62-93 standards.

 

Patented hinged cover speeds installation time by allowing   installer to partially mount cover prior to laying cables.


• Light weight also eases installation and reduces labor  costs.

         

        More Benefits......



INFOSTREAM®    Multi-Channel Raceway
 

Data Only Configuration

Components:  Raised Communications Device Bracket

( HT-MCR-RDB

Area : 3.08 Sq. In.

Power Only Configuration

Components:  Raised Electrical Device Bracket

( HT-MCR-REB

Area : 2.50 Sq. In.

 

POWER & DATA INLINE

 

 

              Components:

  • Raceway Side Divider ( HT-MCR-SD )
  • Raised Device Bracket  ( HT-MCR-RDB )
  • Raised Electrical Bracket  ( HT-MCR-REB )

Data Area : 2.45 Sq. In.

Power Area : 0.80 Sq. In.


OFF SET BOX WITH DATA

              Components:

  • Offset Box  ( HT-MCR-OB )
  • Raceway Side Divider   ( HT-MCR-SD )

Data Area : 4.26 Sq. In.

   Power Area : 1.22 Sq. In.

 


 

INFOSTREAM   Multichannel Raceway

Unique, streamlined design enhances the aesthetics of any installation.

Hinged cover speeds installation.

 

Multi-Channel Raceway Base

Description
Part # Get Quote

Base is supplied with pre-punched mounting slots every 8".

Raceway base also includes adhesive double-sided tape for aid in mounting.
Raceway must still be properly fastened to the wall

per included instructions.

Raceway Base

8 feet with side divider

HT-MCRX-BS8

Raceway Base

10 feet with side divider

HT-MCRX-BS10
Multi-Channel Raceway Cover

Raceway Cover

8 feet

HT-MCRX-C8

Raceway Cover

10 feet

HT-MCRX-C10
Multi-Channel Raceway Divider

White Raceway Side Divider

8 feet

HT-MCRX-SD8

White Raceway Side Divider

10 feet

HT-MCRX-SD10
Replace the "X " in the part number with the following for the desired color :    I (Ivory), FW (Office White), W (White)

 

Multi- Channel Raceway Components

Flat Elbow

Description
Part # Get Quote

Flat Elbow

Joins raceway at 90 deg. flat angle

HT-MCRX-FE
External Elbow

External Elbow

Joins raceway at 90 deg. outside corner

HT-MCRX-EE
Internal Elbow

Internal Elbow

Joins raceway at 90 deg. inside corner

HT-MCRX-IE
End Cap

End Cap

Completes raceway or provides transition for

1/2", 3/4", and 1" conduit

HT-MCRX-EC
Replace the "X " in the part number with the following for the desired color :    I (Ivory), FW (Office White), W (White)

 

Base Splice

Description
Part # Get Quote

Base Splice

Joins 2 sections of raceway base

HT-MCRX-BS
Cover Splice

Cover Splice

Joins 2 sections of raceway cover

HT-MCRX-CS
Raised Electrical Box

Raised Electrical Box

Used to mount NEMA standard single gang device and faceplate.

Raised electrical box allows for additional low voltage wire fill space.

Use with side divider for 2 channel applications.

HT-MCRX-REB
Offset Box

Offset Box

Option for communications devices in raceway and

electrical outlets on side.

HT-MCRX-OB
Replace the "X " in the part number with the following for the desired color :    I (Ivory), FW (Office White), W (White)

 

Benefits

 

All fittings have been designed to maintain the required 1" minimum bend radius

per TIA/EIA-568-B and 569-A standards.


• U.L. Listed to 600 Volts – Meets new UL5A and

CSA 22.2 No. 62-93 standards.


• Patented hinged cover speeds installation time by allowing installer

to partially mount cover prior to laying cables.


• Light weight also eases installation and reduces labor costs.


• Offset elbow is the only solution currently on the market

for wall offsets between 2-7".


• Mates directly with HT-Series TSR and TSRP -

single channel raceway system.


• System is designed to accept all NEMA standard faceplates and devices.


• Offset box gives installer the option to offset electrical outlet

above or below raceway.


• Cable tie mount retains cables inside of channel if necessary

and accepts standard cable ties.


• Entrance end fitting allows entrance into raceway

from ceiling or through wall.

 

 

Back to top


 

 

   
Merchandise on Credit Form
 
 
 
2018 Clark Wire & Cable       1-800-CABLE-IT  (800-222-5348)
wrwr