Return to the Clark Homepage
 

 

Audio Signal Generator with Monitor

 

 

  • Portable or Bench Audio Generator, Meter, and Monitor
     
  • Mic and Line-Level Audio Tone Oscillator with Metering
     
  • Selectable Mic / Line-Level Input and Output
     
  • Balanced and Unbal Connectorized Inputs/Outputs

APPLICATION:

This portable audio instrument is comprised of a precision audio oscillator,

precision level meter and speaker.

The 700 Hz oscillator section features two outputs. The balanced XLR output is front-panel switch selectable for MIC or LINE level (pro level). The unbalanced output operates at -10 dBV (consumer). Output stability is suited to accurate bench top audio testing.

The audio metering circuit features two inputs, an LED meter and a monitor speaker. The balanced input is front-panel switch selectable for MIC or LINE input (pro). The unbalanced input operates at -10 dBV (consumer). Either input may be used to feed the metering circuit. For balanced +4 dBu inputs, meter 0 dB = +4 dBu. For unbalanced inputs, meter 0 dB = -10 dBV. A front-panel volume knob controls the speaker level. The IN PHASE LED illuminates when the oscillator output and metering input are in phase (0 dB level or greater). The PT-AMG2 operates either from two internal 9 volt batteries or from an external 12 Vdc to 30 Vdc supply. Test leads and bench top support bracket are included. The balanced line levels (input and output) may be preset by the user to +4 dBu or +6 dBu.


Outputs: ( 2 )
Balanced Output Level   ( Selectable )
Unbalanced Output Level

XLR -    Mic or Line Level

  Line:   + 4 dbu or + 6 dbu* ( 2.5 k Ohm Load )
- 10 dbv
Phono - ( Consumer Level )
Mic:    - 46 dbu ( 2.5 k Ohm Load, 50 db below + 4 dbu )
Specifications
Oscillator Frequency:
700 Hz Nominal

Output Stability:

Better than 0.01 db
Reference Level Preset:
Switch-Selectable + 4 dbu or + 6 dbu
Power Requirement:
9 V internal or 12 to 30 Vdc External @ 20 mA

 

Description Part # Get Quote
Audio Signal Generator with Monitor RDL- PT-AMG2

 

 
 
 
2017 Clark Wire & Cable       1-800-CABLE-IT  (800-222-5348)